Skip to content
DURAMIC 3D

Data & downloads

The numbers, in writing.

Official technical data sheets straight from Duramic, plus a print-settings cheat sheet for all seven materials. Pin it next to your printer.

Technical data sheets

Duramic's own published PDFs, linked directly from their document library.

Print-settings cheat sheet

Starting points for every Duramic material — tune from here, not from zero.

Material Nozzle Bed Speed Fan Drying
PLA+ 220 ± 10 °C 25–60 °C 30–70 mm/s 100 % after first layer 50 °C for 4 h if stored open
PLA 200–220 °C 25–60 °C 30–70 mm/s 100 % after first layer 50 °C for 4 h if stored open
Matte PLA 200–220 °C 25–60 °C 30–60 mm/s 100 % after first layer 50 °C for 4 h if stored open
Silk PLA 210–225 °C 25–60 °C 30–50 mm/s 100 % after first layer 50 °C for 4 h if stored open
Glow PLA 200–220 °C 25–60 °C 30–60 mm/s 100 % after first layer 50 °C for 4 h if stored open
PETG 240 ± 10 °C 70–80 °C 30–60 mm/s 30–50 % 65 °C for 6 h — PETG drinks moisture; dry it if it strings
TPU 95A 220 ± 10 °C 25–60 °C 20–40 mm/s — slow is smooth, smooth is fast 50–100 % 55 °C for 5 h — TPU is hygroscopic

Ranges are Duramic's published starting points — your printer, layer height and ambient temperature all nudge the sweet spot. Each material page has the full notes.

On the roadmap

Slicer profiles, one click away

Coming with the full site: tuned slicer profiles for every Duramic material, ready to import. This concept demo lists the plan, not the files — we'd rather tease honestly than link a dead button.

Bambu Studio

Planned

Tuned filament presets for X1 / P1 / A1 machines — AMS-ready, cardboard-spool settings included.

OrcaSlicer

Planned

The community favorite. Per-material profiles with pressure advance and flow already dialed.

PrusaSlicer

Planned

Profiles for MK3/MK4 and Mini — plus notes for anyone importing into other slicers.

Until then, the cheat sheet above plus your slicer's generic PLA/PETG/TPU preset gets you 95% of the way.

Concept redesign · Assista Marketing