Duramic 3D TPU 95A Flexible
Bends, bounces, and prints better than TPU should.
4.7★ · 1,020 Amazon ratings (July 2026)
From $26.99 on Amazon $23.99 direct
Colors
The color wall
6 shades of TPU 95A, all 1.75 mm, every spool vacuum-sealed with desiccant.
-
Black
-
White
-
Blue
-
Red
-
Silver
-
Yellow
Settings
Print it right
The numbers that make TPU 95A behave — plus the tricks the box label doesn't tell you about layer adhesion and clean retraction.
Nozzle
220 ± 10 °C
Bed
25–60 °C
Speed
20–40 mm/s
slow is smooth, smooth is fast
Fan
50–100 %
Drying
55 °C for 5 h
TPU is hygroscopic
- Direct-drive extruders are TPU's best friend; Duramic's 95A is stiff enough for well-tuned Bowden setups too.
- Minimize retraction (1–2 mm) and disable coasting for the cleanest flexible prints.
Printer check: enclosure — not needed · hardened nozzle — not needed.
Beginner-friendly
At a glance
The plain-English version. No lab coat required.
- Difficulty
- Moderate
- Toughness
- Extreme — stretches to ~3× its length
- Warping
- None
- Odor
- None
- Enclosure
- Not needed
- Hardened nozzle
- Not needed
For the engineers
The spec sheet
The numbers, in a real table. Bring your calipers.
| Spec | Value |
|---|---|
| Diameter | 1.75 mm |
| Accuracy | 100 % ± 0.05 mm · 97 % ± 0.02 mm |
| Shore hardness | 95A |
| Elongation | Stretches ≈ 3× original length |
| Net weight | 1 kg (2-packs available) |
| Extruder | Direct drive ideal; tuned Bowden OK |
| Packaging | Vacuum-sealed + desiccant + storage bag |
No fine print
The honest bit
Every material has tradeoffs. Here's TPU 95A's full scorecard — the good, the meh, and the wrong-tool-for-the-job.
Where it shines
- Shore 95A: flexible but printable
- Stretches ~3× original length without tearing
- 4.7★ — the best-rated spool in the lineup
- Tolerance: 100 % within ±0.05 mm, 97 % within ±0.02 mm
Worth knowing
- Wants slower speeds (20–40 mm/s)
- Bowden setups need tuned retraction
Word of mouth
Makers on TPU 95A
Real posts from real makers — every quote linked to its source. No astroturf.
Near-flawless results that look as good as my PLA prints.
Keep learning
Go deeper
Short guides, zero fluff.
Ready to print TPU 95A?
From $26.99 on Amazon or $23.99 direct — vacuum-sealed, tangle-checked, and covered by a 30-day money-back guarantee.